Tactical Rifles.net: Wipe Out is a must!

                                                                                                                        WIPE-OUT ™ is a revolutionary new product that solves all the problems encountered with conventional bore cleaners.

The primary reason for using any type of cleaning preparation in the barrel of a firearm is to remove those agents left behind which would adversely affect the accuracy of the particular firearm and its use life. 

If this were not the case we could shoot endlessly with no recourse but to bring on more ammunition. Unfortunately, firearms have a fatal flaw. The products of combustion and metal fouling from bullet materials, and carbon which is a product of burning powder, produce a deteriorating effect on the accuracy of a given firearm. As these residues build up inside the barrel; accuracy decreases conversely. 

It is the removal of these four types of fouling: 1. Powder fouling (smokeless or blackpowder) 2. Metal fouling (copper or lead alloy) 3. Carbon , 4. Molybdenum (usually introduced by the use of Molybdenum coated bullets), which will restore accuracy in a barrel whose usable life is still viable. Most traditional products were never meant to remove anything other than powder fouling. 

They were given a pleasant smell, but were totally in-effective for most problems that cause the loss of accuracy. 

Loss of accuracy is normal in all firearms after they have been used in a prolonged shooting session. 

The barrel will become fouled with gunpowder residue as a result of combustion, additionally: two other materials are deposited internally to the barrel,....... carbon and metal fouling from bullet material . Most of the shooters today are aware of metal fouling caused by lead alloy bullets, and copper jackets. They are also aware that powder fouling will cause the barrel to become dirty and fouled causing inaccuracy.  

These two are the most difficult to remove and are the greatest cause for the loss of accuracy in a firearm. However, many are not aware that carbon is probably the most difficult product of the firing cycle to remove from the barrel.

Most of our Dads and Grand Dads didn't tell us about these problems because they probably were unaware of them, and they thought the product they used, was effective. Learn more about Wipe Out at:
http://www.sharpshootr.com/wipeout.htm